G-Code G01 Linear Interpolation.
G-CODE FORMAT: N_G01 X_ Y_ Z_F
Description:
G01 Gcode is a cutting movement
following a straight line at a set feedrate (F). G01 Specs the Start and the end points and the
machine control calculates automatically the intermediate points to pass
through to get a straight line.
Note:
1.
The G01
code is modal and is therefore incompatible with G00, G02 and G03 codes in the
same block.
2.
The G01
code can be written into a program in two ways: G01 or G00.
3.
G41 or G42 Cutter compensation can be applied
during G01.
4.
The axis co-ordinate moves following a G01
command can be programmed as either:
Absolute
values (relative to a set datum point) are following setting of the G90 code or
incremental values (relative to the last stated co-ordinate in the program)
following setting of the G91 code.
Example:
N170 G90 G01 X50 Y100 F100
I should thank you for writing on this topic, very useful information you have given through this blog regarding Linear Interpolation Used for in CNC Machining. Edge Rounding Deburring Machines.
ReplyDeleteInteresting in so very much for this great site.Glass Cutting Service.
ReplyDeleteI should thank you for writing on this topic, very useful information you have given through this blog. Aluminum Nitride CNC Machining Services.
ReplyDeleteUndoubtedly you are a marvelous writer. This post of yours will work as a great resource of information wherefrom one can get rich amount of data.Polished Ceramic Substrates.
ReplyDeleteThank you so much for sharing this blog with us. It provides a collection of useful information. You obviously put a lot of effort into it. Custom Optical Coatings.
ReplyDeleteGreat blog youu have
ReplyDelete